Wednesday, June 29, 2011

Setting the Stance

Nathan had asked me to bring in my front wheels for setting up a height reference.

It is quite obvious the car will have a lower stance than factory, but the factory never dreamed of putting a 10" wide tire on the car, either.
 The car will be fitted with 15" rally wheels.  These wheels are correct for that era.  The front will tote an 8" wide wheel(s) with a 4" back offset.  The rear will be showing off  12" rubber mounted to a 10" wide wheel(s) with a 6" back offset.  This allows the wheels to line up evenly as you are looking down the length of the car.

No comments:

Post a Comment